Showing posts with label filtration. Show all posts
Showing posts with label filtration. Show all posts

Sunday, October 19, 2025

Membrane extracts lithium with precise selectivity and minimal environmental impact

Good news!

"A new membrane marks an important step toward more efficient extraction of lithium which is needed for reusable batteries. The design can also be used to extract other essential elements like cobalt and nickel. ...

The membrane developed by the team extracts lithium using considerably less energy, while maintaining higher selectivity. 

The membrane collects lithium through a process called electrodialysis. An electrical current is applied to the brine which pushes lithium ions to pass through the membrane, whilst other elements like sodium, calcium and magnesium get left behind. ...

The team were able to create such an effective membrane by inserting nanoparticles of lithium titanium oxide (LTO) into it. The crystal structure of LTO is the perfect size for lithium ions to move across without allowing for other elements to pass through. ..."

"... the researchers demonstrated near-perfect lithium selectivity by repurposing solid-state electrolytes (SSEs) as membrane materials for aqueous lithium extraction. While originally designed for the rapid conduction of lithium ions in solid-state batteries — where there are no other ions or liquid solvents — the highly ordered and confined structure of SSEs was found to enable unprecedented separation of both ions and water in aqueous mixtures. ..."

From the abstract:
"Precise separation of ions of the same polarity and similar valence and size remains a critical need in resource recovery from waste streams. Here, we report the rational design and scalable fabrication of a thin film nanocomposite (TFN) cation exchange membrane to achieve precise selectivity for lithium over competing cations.
The precise selectivity is realized by an ultrathin polyamide (PA) layer incorporated with amine functionalized β-monoclinic lithium titanium oxide (N-LTO) nanoparticles using a scalable interfacial polymerization process that allows high N-LTO loading while minimizing interfacial defects.
The TFN membrane demonstrates superior Li+ permeability, with Li+/Ca2+ and Li+/Na+ selectivity reaching 173.90 and 13.58, respectively. The Li+/Na+ selectivity is attributed to the Li+-exclusive transport pathway in the layered structure of the N-LTO, while size exclusion by the highly cross-linked N-LTO-PA also contributes to the Li+/Ca2+ selectivity.
Molecular dynamics simulation shows that the electrical field drives Li+ dehydration and accelerates the migration of the dehydrated Li+ while Na+ is blocked due to its larger size than the Li+ cavity. The high Li+ selectivity and permeability enable energy-efficient, precise, and chemical-free lithium extraction using the electrodialysis process. The TFN membrane architecture also allows simple and scalable fabrication of a multi-functional polymer-inorganic nanocomposite membrane."

Membrane extracts lithium with minimal environmental impact

Rice researchers develop efficient lithium extraction method, setting stage for sustainable EV battery supply chains (original news release) "Solid-state electrolyte membranes revolutionize lithium harvesting with near-perfect selectivity"



Fig. 1: TFN-CEM with high and uniform loading of N-LTO.



Monday, April 22, 2024

Greater access to clean water by desalination, thanks to a better membrane

Good news! Desalination is salvation!

"... With an innovative material design, the Yale and Nanjing researchers have developed a reverse osmosis membrane that not only desalinates water but is also resistant to chlorine as well as fouling. Rather than using the industry gold standard of polyamide to develop these membranes, the researchers instead used polyester.  The choice of material is critical, as this polyester membrane allows for substantial water permeability, has a high rejection for sodium chloride and boron, and a complete resistance toward chlorine. The ultrasmooth, low-energy surface of the membrane also outdoes polyamide membranes in preventing fouling and mineral scaling.
Further, the team designed the membranes so that they could be easily adopted by the industry. ..."

From the editor's summary and abstract:
"Editor’s summary
Reverse osmosis membranes have been dominated by polyamide chemistry, which has sufficient performance in terms of water permeability and salt rejection but is vulnerable to degradation in the presence of chlorine or other strong oxidants. Polyesters are not typically used for water filtration membranes because they suffer from hydrolytic degradation when immersed in aqueous solution. Yao et al. show that the polymerization of 3,5-dihydroxy-4-methylbenzoic acid with trimesoyl chloride yields a polymer membrane with impressive resistance to hydrolytic degradation in acidic or basic conditions (up to pH 9) and a complete resistance to chlorine. ...
Abstract
Thin-film composite reverse osmosis membranes have remained the gold standard technology for desalination and water purification for nearly half a century. Polyamide films offer excellent water permeability and salt rejection but also suffer from poor chlorine resistance, high fouling propensity, and low boron rejection. We addressed these issues by molecularly designing a polyester thin-film composite reverse osmosis membrane using co-solvent–assisted interfacial polymerization to react 3,5-dihydroxy-4-methylbenzoic acid with trimesoyl chloride. This polyester membrane exhibits substantial water permeability, high rejection for sodium chloride and boron, and complete resistance toward chlorine. The ultrasmooth, low-energy surface of the membrane also prevents fouling and mineral scaling compared with polyamide membranes. These membranes could increasingly challenge polyamide membranes by further optimizing water-salt selectivity, offering a path to considerably reducing pretreatment steps in desalination."

Greater access to clean water, thanks to a better membrane | Yale School of Engineering & Applied Science

Friday, August 06, 2021

Improving industrial filtration with graphene oxide filters

Recommendable!

Reducing green house gases does not require government to impose that electric cars have to replace gasoline powered cars!

"... many industries continue to use energy-intensive thermal methods of separating out liquids. In some cases, that’s because it’s difficult to make a filtration system for chemical separation, which requires pores small enough to separate atoms. ...
This is valuable because separation processes account for about 22 percent of all in-plant energy use in the United States ...
The paper industry is particularly exciting because separation processes just in that industry account for more than 2 percent of U.S. energy consumption ...
Made of graphene oxide ..., the membrane can reduce the amount of energy used in industrial separations by 90 percent ...
Via Separations began piloting its technology this year at a U.S. paper company and expects to deploy a full commercial system there in the spring of 2022 ...
“The advantage of graphene oxide is that it’s very robust,” ... “It’s got carbon double bonds that hold together in a lot of environments, including at different pH levels and temperatures that are typically unfriendly to materials.” ...
Graphene oxide is significantly more durable, and ... can customize the pores in the material to suit each industry’s application. ... “modulating pore size while retaining robustness to operate in challenging environments.” ..."

Cleaning up industrial filtration | MIT News | Massachusetts Institute of Technology MIT spinoff Via Separations aims for industrial decarbonization with its durable graphene oxide membranes.